MX150 Micro Mesh is a high-precision abrasive material specifically designed for removing deep scratches after fret leveling or refretting. It consists of tiny abrasive crystals embedded in a flexible fabric. When used for fret polishing, MX150 Micro Mesh gently eliminates scratches and imperfections from the frets' surfaces.

Polishing your guitar frets with MX150 Micro Mesh is a straightforward process. Start by securing a strip of MX150 Micro Mesh to the FRTLZR Fret Polishing System and rub it gently in a back-and-forth motion along the fret's length. Repeat this process for each fret. For even finer results, you can progress to higher-grit abrasives or use the FRTLZR Fret Polishing System in conjunction with MX150 Micro Mesh. Finally, clean the frets to remove any residue.

Yes, MX150 Micro Mesh is effective at removing deep scratches and imperfections that occur after fret leveling or refretting. Its abrasive properties are designed to tackle more significant surface flaws, preparing the frets for final polishing stages.

MX150 Micro Mesh is typically used after fret leveling or refretting to remove deep scratches. It's not usually necessary for regular fret maintenance. For ongoing fret care, consider using finer-grit polishing materials during regular string changes or whenever you notice fret tarnishing.

MX150 Micro Mesh is generally safe for use on various types of guitar frets, including nickel-silver and stainless steel. However, due to its abrasive nature designed for deeper scratches, it's advisable to use it carefully and test on a small, inconspicuous area if you're uncertain about your fret material.

When using MX150 Micro Mesh, apply light to moderate pressure to avoid removing more material than necessary. Always ensure the fingerboard is protected to prevent accidental scratches. Using masking tape to cover the wood around the frets or using the FRTLZRE FretboardGuard is a good practice. Clean the frets thoroughly after polishing to remove any abrasive residue.

Absolutely! MX150 Micro Mesh can be used in conjunction with the FRTLZR Fret Polishing System for enhanced results. This combination allows you to efficiently remove deep scratches and achieve a high-gloss finish on your frets.